Are you struggling to keep your home cool as summer approaches? You may be facing a problem with your heat pump’s cooling ability—and it can be a difficult thing to troubleshoot. If you’re feeling frustrated and at a loss for how to solve this, don’t worry!
We’ve compiled the ultimate guide on why your heat pump might not be cutting it for those hot days: 7 reasons why your heat pump is not cooling. From refrigerant leaks to inefficient filters, you’ll find useful information that will help get your home back in shape quickly.
If you’ve found yourself asking “why is my heat pump not cooling?” This post is for you. Keep reading below to discover the common reasons behind improper cooling—you could have it up and running again in no time.
If you live in Rogers, Arkansas or Seattle, Washington, it’s best to contact a local HVAC service that can help you out.
Table of Contents
Why is my heat pump not cooling?
Your heat pump malfunction could be caused by a few different things. Here’s a list of the eight most common reasons.
1. The heat pump is off or the thermostat is set incorrectly
If your heat pump is not cooling as it should be, there could be a few different possible causes. The most likely explanation is that the heat pump itself may be off or the thermostat may be set incorrectly. To turn on the unit, check the switch near the heating and air system to confirm that it is in the “on” position.
For the thermostat, you’ll want to check that its temperature setting is lower than the current temperature of the space. If the thermostat is set incorrectly, it can cause problems with cooling.
Make sure that your thermostat is in “cool” mode and ensure that your desired temperature is set lower than the one in the room, otherwise it won’t get cooler.
2. Your filter is dirty or needs replacing
When homeowners ask “why is my heat pump not cooling my house”, one of the most common reasons is because the air filter is dirty. The air filter traps unwanted particles in the air like dirt, dust, and allergens. If it’s too full, it can hinder the airflow and cause the heat pump to overwork.
As a result, the heat pump won’t cool the home as effectively. To resolve this, simply clean or replace the air filter.
3. There is an leak in the ductwork
Duct leaks can have a significantly negative effect on your heat pump’s ability to cool the air in your home. The expelled air from the unit contains a mix of liquid and gas, meant to regulate temperature. These often valuable elements are then lost when passing through poor quality duct work, leaving an insufficient amount in the lines and preventing the unit from performing at peak levels.
Sealing any leaks present will help keep your heat pump running smoothly and optimize its cooling performance. Regular maintenance to identify and repair any potential issues is key to ensuring both your comfort, and that of your pocketbook.
4. The evaporator coils are frozen
Another common reason why a heat pump is not cooling is because the evaporator coils are frozen. The evaporator coils absorb the heat from the air, and if they become frozen, they will not be able to function properly. To solve this problem, you will need to defrost the evaporator coils.
5. The condenser coils are dirty
The condenser coils release heat from the refrigerant, and if they become dirty, they will not be able to do their job properly. As a result, the heat pump will not be able to cool the home as effectively. To solve this problem, simply clean or replace the condenser coils.
6. The outdoor unit is dirty
The outdoor unit of a heat pump houses the compressor and condenser coils, and if it becomes dirty, it can cause problems with cooling. To fix this problem, simply clean or replace the outdoor unit.
7. There is a refrigerant leak or it needs to be refilled
We’ve heard from homeowners who have said “I’ve done all of the above but I’m still at a loss as to why my heat pump is not cooling.” If you’re in that boat, don’t worry.
If there is a refrigerant leak, it can affect the heat pump’s ability to cool your home. Refrigerant is what helps with the transfer of heat, and if there is a leak, it can cause the system to lose its charge and be unable to transfer heat properly.
To fix this, you will need to have a professional repair the leak and recharge the system.
Conclusion – Why is my heat pump not cooling?
In conclusion, before making a decision about your cooling system, it’s important to inspect the existing components of your heat pump system.
Issues can range from clogged refrigerant lines to loose connections and broken parts. If you have any questions or concerns, we recommend calling a professional technician who can diagnose and address the issue quickly and accurately. Taking this step could save you time, money and frustration in the future.
Remember that periodic maintenance is important for both preventing issues from occurring as well as making sure your new system operates efficiently for years to come.