After reading many “best red dot sights reviews”, we are practically hoping that you are well-aware of the reason you need a red dot sight on your pistol.

We know for a fact that using Red Dot sights can really give you an advantage in terms of speed and accuracy. However, installing Red Dot sights on the pistol happens to be a totally different conversation.

There are different types of the options available, depending on the gun. Some use the Custom Slide option, whereas some have their sights slide machine a little in order to accommodate the sighting instrument. In order to help you be able to mount a Red dot sight on your pistol, we have decided to provide you with some tips that will allow you to install red dot sights on your pistol. Mount it on your favorite pistol for greater accuracy and faster target acquisition. You won’t need to worry about sight alignment, eye dominance or finding your target. Just put the red dot on your target and pull the trigger. Compact and lightweight

We have broken the process into several steps:

Part 1: Basic Things to Consider when Mounting Pistol:

1.Choosing the Correct kind of Dots:

When it comes to installing Red dot sights on pistols, you have three options:

• Adjustable LED (Only)
• Tritium Dot
• Dual Technology

All of these scopes excel in their own way. Tritium dots make for a good choice for anyone that operates their weapon during the nighttime or somewhere where the lighting conditions are poor. However, Tritium dots don’t do a good job in ambient light, and in those scenarios, we prefer to stick with the LED only.

2.MOA (Minute of Angle) Size

There are different red dots available that come with different MOAs. The users have the option to choose from either 6 MOA, 3 MOA, 3.25 MOA, 1 MOA, etc.

• A lots of people are going to be giving you the different recommendations that will depend on your weapon and the shooting distance.
• We think that when it comes to pistols,  anything above 3 MOA is overkill since a pistol does not have the ability to be able to shoot at long distances. Even if you have to take a distant shot, 3 MOA is going to be enough.

 

However, if you want to alter the MOA of your red dot, we prefer that you choose an option that comes with different options. There are many options to choose from, out of the which Vortex Company happens to be a viable choice.

3.Mounting Considerations

Most of the people who don’t do much mounting work should go for the Milled custom slide. But before you choose them, here are some aspects that you must know about:

• Firstly, it’s going to be depending on who did the cutting on the slide.
• As for the second step, Having a Milled custom slide might limit you to the dots you can use. If you want a piece of equipment that comes with a different mounting method, you are going to face difficulty in the mounting it.
• Moreover, you will need to throw in an extra $100 to have the slide machined for the custom slide.

In today’s world, ammunitions such as pistols making their way onto the market usually come cut so that the users can fit the optic. Having said that, It would be a better choice to look for mounting plates for Glock. Also, make sure that you buy the plates which you are able to change considering the sighting optics you are going to be using.

However, you must keep in the mind that you need to have the right mounting plate.

Part 2: Mounting an RDS on a Pistol

Now that we know that we have pistols with cut-out slides to fit in the optics, this part will explain to you how to use the dented area to set the optics.

1.Begin by Placing the Lower Mounting Piece on the back part of the slide:

You will have to remove the rear sight and leave the cutoff area open. Note that it only applies if you have placed a mounted rear sight. You have to keep this important bit of information in mind. Make sure that you have the right plate. If you want to the properly mount the weapon and you want to make that the optic sits tight on the pistol, here is something.  You must carry with you the blue Loctite to deal with the screws.

Red Loctite works too. However, You are going to need extra heat in order to remove the screws.

After you follow the instructions above, move ahead as you place the mounting piece on the space and clam it in. You also have the option to push it with the help of a Sight pusher. If you prefer sliding it in, it’s a viable option for you. However, make sure that it is centered.

2.Place the mounting plate of the red dot sight on the slide:

After following through on the previous step, place the mounting plate on the slide. You also have to ensure that the rear screw holes align with holes present on the lower mounting piece you inserted earlier.

3.Use the presented screws to secure and tighten the base:

On you get the plates aligned, take a mounting screw and fix them down.

4.Place the Sighting optics on the weapon and tie it loosely:

Once you have secured the mounting plate, place the optics on it and screw the hole.

5.Once you are done securing the mounting plate, place the sighting instrument on your weapon and align the screw holes.

Part 3: How To Sight in a Red Dot Sight:

Mounting is a crucial element in your aim as it can contribute to or hinder your accuracy. Having said that, you must ensure that you mount the sight properly. To sight the aim properly, follow these steps:

1.Evaluate the point of aim:
2.Use the dials on your weapons to adjust the aim:
3.Prepare your weapon:

Conclusion

With all the information mentioned above, we bring the complete guide on mounting and sighting a red dot sight to its end. We hope that you find this useful.