Site icon theInspireSpy

Clean a Dirty Hot Tub in 6 Easy Steps

Clean a Dirty Hot Tub in 6 Easy Steps

There’s nothing quite like jumping into a hot tub after a long day—unless, of course, your hot tub is dirty. Fortunately, cleaning a hot tub doesn’t have to be a dreaded chore. In fact, with these six easy steps, you can have your hot tub looking and smelling clean in no time! 

Empty Out the Water 

The first step in cleaning your dirty hot tub is to empty out all of the water. This will allow you to really get in there and scrub away any dirt or debris that has accumulated on the walls and floor of the hot tub. It’s important to make sure that you follow all safety instructions when emptying out the water. 

When draining the hot tub, it’s important to make sure you do so safely. Start by turning off the power source and disconnecting any cords or hoses that are connected to your hot tub. Once these steps are complete, you can then open up the drain valve and allow the water to begin flowing out. Depending on how much water is in the tub, you may need to place a bucket or container underneath the drain valve to catch any overflow. Make sure that the water is draining into a suitable area and not on the ground or in an area where it can cause damage. Once all of the water has been drained out, close the drain valve securely and proceed with the cleanup job.

Scrub Away Any Dirt or Debris 

Once all of the water has been removed from your hot tub, it’s time to scrub away any dirt or debris that has accumulated on its surfaces. You’ll want to use a non-abrasive sponge and some mild soap (like dish soap) for this task. For particularly stubborn spots, you may need to use an old toothbrush for extra scrubbing power. Be sure not to use anything too harsh, as this could damage the surfaces of your hot tub. 

To ensure the best proper care of your hot tub, it’s important to avoid using any harsh, abrasive materials when cleaning it. These can cause damage to the surface of the tub and may even lead to further problems down the line. Additionally, it’s best to stay away from chemical cleaners that are not specifically designed for hot tubs, as these could be harmful to you and the tub itself.

Give It a Good Rinse 

When you’re finished scrubbing away at the dirt and debris, it’s time for a good rinse off. Use a garden hose or bucket filled with fresh water to give your hot tub a thorough rinse off. Make sure that you get all corners and crevices so that there is no soap residue left behind.

Clean or Replace Your Filters 

Your filters are essential when it comes to keeping your hot tub clean and running smoothly. Take some time every couple of weeks (or more often if necessary) to clean out your filters using filter cleaner or mild soap and warm water. This will help keep them functioning properly while also preventing any buildup of dirt and debris from accumulating inside them over time.

When it comes to picking up hot tub filters, you have several options available. You can find them online from a variety of vendors, online, or at home improvement stores. Alternatively, some specialty pool and spa supply stores may carry a selection of filters specifically designed for hot tubs. It’s important to make sure you get the right filter for your hot tub model, as there are many different sizes and types available. Be sure to read the instructions carefully before purchasing to make sure you’re getting the right one for your needs. Also, be sure to remember that filters should be replaced regularly for optimal performance.

Refill Your Hot Tub With Fresh Water 

Now that everything is nice and clean, it’s time to refill your hot tub with fresh water. Make sure that you follow all safety instructions when refilling your hot tub with fresh water so that it is up to proper sanitary standards before use.

As a hot tub owner, you probably already know what’s good and bad for your hot tub. No matter the case, it’s important not to put anything other than clean water into your hot tub. This means avoiding things like oils, bubble bath, detergents, and any other type of chemical that could be harmful to the hot tub itself or its users.

Additionally, it’s best to avoid putting any food items such as fruits, nuts, or seeds into your hot tub as they can attract bugs and cause the water to become contaminated. It’s also not a good idea to use any kind of sharp object in your hot tub, such as razors, glass, or other sharp objects that could puncture the surface. Lastly, it’s important to keep any pets away from your hot tub as their fur and nails can easily cause damage to the tub’s surface.

Sanitize Your Hot Tub Regularly

Finally, remember to sanitize your hot tub regularly in order to prevent any bacteria or algae from growing inside it over time. Chlorine or bromine are both great options for sanitizing your hot tub but make sure that you follow all safety instructions when adding these chemicals into the mix as well.

When in Doubt, Consult an Expert

If your hot tub is really dirty and you can’t seem to get it clean no matter how hard you try, then it may be time to call in the experts. A professional hot tub technician, such as one at Wellis Hot Tubs of Colorado, can assist in diagnosing any potential problems or issues with your hot tub that could be causing the dirt and grime build-up. They will also be able to provide you with detailed instructions on how to clean and maintain your hot tub in the future, ensuring that it stays fresh and odor-free. Don’t hesitate to call an expert if your hot tub is not responding to your cleaning efforts; they can help restore it back to its pristine condition.

Cleaning a dirty hot tub doesn’t have to be an arduous task; by following these six simple steps, you can have yours looking and smelling like new in no time! Just remember, safety first, so always make sure that you follow all safety instructions when dealing with electricity around water or adding chemicals into the mix. Happy soaking!

Exit mobile version