If you cannot find your key, you may want to read this article. It contains several simple ways to open a locked door. You can also use a butter knife or credit card. A flat head screwdriver will also work. You can try each method to see which one works best for you. This way, you can have peace of mind while trying to get into your house.
Table of Contents
Using a credit card
Using a credit card to open slammed doors might seem like a good idea. However, this technique is not as clean and easy as it looks in movies. A credit card will require a fair amount of wiggling and bending. And if you are not able to find a card of the right thickness, you can cut a strip of plastic from a soda bottle.
First, slide a credit card through the gap between the door and the doorframe. The door will automatically open once the card reaches the lower part of the slope. When the card reaches the door frame, push the door backwards until it slides through the door and unlocks the lock. After that, you are all set! You should now have the keys and a way to get into the house.
Another option is to use a plastic wallet. However, it’s important to remember that a plastic wallet won’t work in the same way as a credit card. The key is to make sure that the card is not damaged. Otherwise, it can’t open the door. Also, make sure to have a spare credit card handy. This way, you can get into your house or car without a hassle!
As with any other trick, this method doesn’t work on all locks. In some cases, a credit card will not open a door with a deadbolt lock, but it will work in most locksets. A credit card will not work if the lock has a reinforced strike plate. If the door isn’t secured with a deadbolt, you can attempt to wedge a credit card into the door using this method.
Using a butter knife
A butter knife is an excellent substitute key for locked doors. Insert it into the keyhole and turn until you hear a click. Then, you can insert it between the door and the frame, just above the position of the door knob. Once the door unlocks, you can take it out of the jamb. Obviously, you should never sharpen a butter knife in public.
If you’re having trouble getting into the door, you can use a butter knife to open the latch. To do this, insert the knife about three inches above the door knob, and then slide it between the striker plate and door. Once inside, move the blade around until the tip of the knife touches the latch. Repeat this process until the door is open.
Another way to open a locked door without the key is to use a paper clip or hair clip. Place the paper clip or hair clip over the blade of the knife, and twist to apply pressure. You can also use a paper clip to press down on the lock. Before you try this method, make sure to flatten the knife first so that you can fit it into the keyhole. Then, pull it out carefully, raking it over the pins to release the lock.
Another alternative to using a screwdriver to open a locked door is to use a butter knife. Some locks have a hole that you can fit a thin rod through. A butter knife is longer than a screwdriver, so you can use it as an alternative to a screwdriver. However, this method might damage the lock and may not be safe for your table.
If you’ve lost your key or can’t find your key, you can still make a bobby pin to open the door. You will need a flat piece of 0.5 inch to make the keyway wide enough to fit the bobby pin. If the bobby pin is too long, you’ll need to bend it until you can make a straight piece.
Using a drill
If the bobby pin on your keychain doesn’t fit the lock, you may be able to pry the lock apart by drilling through it. Be sure to use a power drill and a bit made for metal. Set the drill bit above the keyhole and in line with the threshold of the pins and cylinder. Start by drilling through a small pin, then move on to the next. Lubricate the drill as necessary.
The drill is not the best option for opening a locked door, but it can work wonders if you’re desperate. The drill can actually damage the lock, breaking the tumblers and ruining the lock. However, if you’re in dire need, you should call for help immediately. If you can’t find a locksmith, drilling the lock might be your only option.
A drill can also be used to unlock a locked door. Depending on the type of lock, you might need to drill the lock from the inside. This can be done using a number of different techniques. You might need to drill the lock from the back of the door to get at the keyhole. If you’re able to drill through the lock, the door should open with a click.
Before drilling the lock, you’ll need to locate the shear line, which is the line between the cylinder and the pin. Be sure to start with a small bit so you don’t damage the lock. Then, use a screwdriver to pry it open. Don’t try hammering the lock with a hammer, though, as this method can damage the door. If the hammering method doesn’t work, try bashing the doorknob downward repeatedly until the lock breaks.
A wire bobby pin can also be used to unlock a door. To use it, you will need to bend it into a specific shape. The first one is a replacement for the original key and will give you a way to turn the lock cylinder. The second one should be inserted with the protruding part of the bobby pin acting as the handle.
Using a flat-head screwdriver
If you can’t get into your house because you can’t find your key bobby pin, don’t give up hope. There are many simple ways to open locked doors without a key. For instance, if you cannot remove the hinges, you can use a flat-head screwdriver to open the door. First, you need to find the pin that holds the door open. You can do this by inserting the screwdriver between the top knuckle and the pinhead. Then, tap the screwdriver handle with a mallet to loosen the pin and open the door.
If you cannot find the key bobby pin, you can try drilling the lock. First, find where the door plate meets the locking mechanism. Use the flat-head screwdriver to push the lock away from the door plate. The screwdriver may be long enough to pry the door open. You need to be sure that the screws are lubricated so they don’t come off in the process.
If you don’t have a key, you can use a bobby pin to open the door. A bobby pin is a spring-loaded pin that prevents the door cylinder from turning. The bobby pin can be jiggled by the user to turn the lock cylinder, which turns the bolt and opens the door.
Another method to open a locked door without a key is to use a paper clip instead. These are shaped to fit many different types of lock, including mortise locks and pin tumbler locks. In addition, they can also be bent to fit basic door knob locks. To test if this method works, try gently turning the pin. This will allow you to hear the click as it unlocks.
If you can’t find your key bobby pin, a flat-head screwdriver is another alternative. If the door knob is locked, you can use a small flat-head screwdriver to unlock the door knob. However, a flat-head screwdriver with a flat head should fit through the small hole of the door knob. Then, you can turn the screwdriver counterclockwise until the lock disengages. While this method is time-consuming, it will get the job done eventually.