The Internet is becoming faster and more pervasive. As this trend continues, the demand for higher bandwidth solutions is also increasing. The two most common technologies to help provide these high-speed connections are Augment Category 6A or 10 Gigabit Ethernet cabling.
Which one should you choose? To find out more, you can visit https://try10.com/, here you can find a comprehensive guide on topics related to Ethernet Cables and much more.
In the past, users had to rely on category six standards cabling which lacked performance and bandwidth. This meant that it was not possible for data centers and enterprises to benefit from faster networking speeds. And link aggregation with most inner-office servers or network devices.
By contrast, today’s Augmented Category cables can accommodate high-speed networks up to 600 MHz (250Mhz over 100 meters and provide an optimal performance.
Table of Contents
What are Augment Category Cables?
Augment Category 6A or Augmented Category 7 are the names given to existing category 6/7 cabling which have been augmenting with additional performance enhancements in order to support 10 Gigabit Ethernet connections.
Category 6 was design for speeds up to 350 MHz, while Cat6A supports frequencies up to 500 MHz. The initial specification of the stand only allows it to handle frequencies of 100 MHz after being subject to a test that exposes it to far-end crosstalk (FEXT).
Later on, many changes were made because of issues like alien crosstalk (AXT) and Near End Crosstalk (NEXT), these enhance specifications can manage greater bandwidth allowing it to reach higher speeds. This is why today we have Cat6A.
The primary difference between Cat 6 and Cat6/7 cables is that Cat6/7 doubles the number of twists in each pair to further reduce crosstalk. What this means for users is that it can accommodate 10 Gigabit Ethernet at 100 meters or 1 Gbps at 55 meters (for a four-pair cable). It also allows speeds of 2, 4, 8 and 10Gbps over shorter distances.
Cat 7 Augmented Category Cables by comparison can provide up to 600MHz bandwidth which helps prevent alien crosstalk while significantly reducing both insertion loss and FEXT. This means higher reliability and throughput.
Augment Categories are backward compatible with earlier generations such as category 5e/6 enabling them to be used in any existing infrastructure.
Speed Of Augmented Category Cables
The speeds of Augment Category cables are compatible with the latest high-speed network devices, such as multi-core processors and SSD storage systems which can be easily install into existing data centers without compromising on speed or bandwidth capabilities.
Category six cables are largely use in Ethernet applications to support CAT-S (Class S) 100 Mbit/s and 1000 M bit/s data rates. The Augment Category cabling includes the following features:
RJ45 Connectors with Cat E, F or G performance; Direct attach copper cable; Push-pull latching system for superior fiber insertion retention; All components manufactured from high quality materials which provide exceptional signal integrity. The Enhance Performance Cable ensures that you can get all of your office devices connected at optimum speeds without any additional costs.
By using upgrad category cables like augment category cabling, organizations can benefit by having a more efficient network connection than stand category five networking equipment provide while still being able to connect with existing category five networking equipment.
Why Do We Prefer Augmented Category Cables?
The enhance performance cabling system is built with the latest RJ45 connectors Cat 6, 7 or 8; Direct attach copper cable; Push-pull latching system for superior fiber insertion retention; All components manufactured from high quality materials which provides exceptional signal integrity.
These are just some of the benefits that Augmented Cables provide over traditional category five cabling. Additionally, it can support multi-core processors and storage systems to enhance productivity while being upgradeable to higher speeds without replacing your entire network connection infrastructure.
With this technology companies will be able to expand their current data center capabilities at a fraction of the cost required by other networking equipment technologies on the market today. The best part about augmente category six or ten gigabit Ethernet cabling is that no additional costs are required to achieve the maximum speed and bandwidth capabilities.
How to Determine What Type of Cable to Use
The key to determining which type of cable. You will need in your data center is dependent on the following factors:
Existing Network Infrastructure
Network switches and components are essential when deciding what category cabling to use. If your current switch equipment only supports up to standard Cat5e. You will require Augmented Category 6A or 10Gigabit Ethernet cabling to support your existing network.
Network Switch Equipment
Newer switch equipment tend to support both standard Cat5e/Cat6 or 10GbE/Augmented Category 6A cables. However, if your organization is looking to expand its networking capabilities in the near future. It would be advisable for you to choose the 10Gigabit Ethernet cable technology.
Network Upgrade Plans
If your organization is looking to expand its networking capabilities in the near future. You would require 10Gigabit Ethernet (10GbE) or Augmented Category 6A cabling to achieve maximum speeds and bandwidth. However, if your current equipment only supports up to standard Cat5e/Cat6. Also you will require Augmented Category 6A or 10Gigabit Ethernet cabling.
How Will It Help Your Organization?
If your network switch supports both standard Cat5e/Cat6 cables and 10GbE/Augmented Category 6A, you will be able to use both cabling technologies providing your organization with continued network performance.
This is especially beneficial if you are currently using standard Cat5e or Cat6 networking equipment. And do not plan on upgrading for several years. If your future business growth plans include expanding data center capacity. Augmented Category 6A Cabling provides the same capabilities as new 10Gigabit Ethernet equipment at a fraction of the cost.
Conclusion
Using augmented category cable is a more cost-effective option over upgrading from standard to high-speed networking. So, equipment by providing faster speeds without additional costs or investments in new equipment. This allows companies to take advantage of higher data transmission rates offered on modern networks. Also, without having to install expensive networking devices. Additionally, businesses can ensure that older cabling will remain operable while newer augmentation technologies. Also using so they do not have to worry about replacing everything. All at once when they want higher performance capabilities.