Like Linksys extender red light issue, orange light issue, the yellow light issue has also been troubling users for quite some time. Are you also experiencing the same issue with your device despite achieving Linksys extender setup success? Well, that isn’t good news.

However, you can get rid of it by following the troubleshooting hacks mentioned in this post. Thus, what are you waiting for? Get down to reading without wasting any more time.

[Solved] Linksys Extender Yellow Light Issue

• Restart the Linksys Extender

Restarting or rebooting your Linksys range extender is the first thing that we would like to recommend to you to troubleshoot the yellow light issue. After implementing this hack, you will be able to eliminate the very first reason, i.e. technical glitches that might be behind the issue. Don’t believe us? Follow the steps given here to restart your device:

• Disable every device accessing Linksys extender setup xxx.
• Press the power button on the extender to turn it off.
• Once done, hold on for some time.
• Hit the power button but this time to turn the extender on.

Now, check if the LED light has stopped blinking yellow. If it has not, then you are required to take the help of the following troubleshooting hack.

• Check the Ethernet Connection

The Ethernet cable connecting the Linksys extender and the host router should not be worn out or damaged from any point. Otherwise, the transmission of signals between your devices will happen poorly. Therefore, it is recommended that you get your hands on a new cable. In case, it does not work for you, it is recommended that you use a wireless source to connect your networking devices.

• Pull the WiFi Devices Closer

Another thing that can help you to get rid of the Linksys extender yellow light issue is pulling your networking devices closer. Bringing them closer will help them to communicate properly. However, avoid keeping way too close. You wouldn’t want their signals to collide and lead to other technical issues, right? 

Wondering what issues we are talking about? Not only will you face issues connectivity issues with your extender but you will also get stuck in case you want to access the Linksys router setup wizard.

• Eliminate WiFi Interference

Smart home appliances like cordless phones, Bluetooth speakers, microwave ovens, baby monitors, refrigerators, and washing machines can block the signals of your Linksys extender thereby causing the yellow light issue. 

Therefore, you are required to do one simple thing, i.e. changing the location of your wireless range extender. Apart from the aforementioned appliances, keep your extender away from reflexive surfaces like mirrors and fish tanks, and utensils containing a large amount of water.

• Perform Factory Default Reset

Resetting the device is the last thing that we recommend for users to fix the yellow light issue. If you are still facing the same issue, then we would like to advise you the same thing. With the help of these guidelines will be able to reset your device:

• Find the location of the Reset button.
• Whenever you find it, carefully press it.
• Do not forget to wait for a couple of seconds.

Right after you are done performing reset, it is recommended that you set u your device from scratch. You can refer to the setup process guidelines in the user manual. Apart from that, if you ever feel the need to set up your Linksys router using the Linksys router login IP, then also referring to the user manual will be useful.

If you liked reading this post, don’t mind sharing your feedback with your fellow readers via the comment section.