Being that there are filaments that cannot burn out in an open space, an enclosure is highly required for such. Snapmaker has made it possible for you to enclose your 3D printer using this Snapmaker 2.0 enclosure. The enclosure has a special role to play by ensuring that the inner temperature is well maintained. This enclosure is well equipped with a ventilation system which gives you the opportunity to regulate the temperatures with a lot of ease. Below are some of the reasons why you should use the Snapmaker 2.0 enclosure.

• Reduced loss of heat

During the printing process, the temperature is supposed to be maintained at a certain level for it to produce the best prints. While printing, heat is a major requirement, and losing the heat will require you to compensate for it to achieve your desired goals. Using extra heat will negatively affect the electricity bill. The Snapmaker 2.0 enclosure does the important task of ensuring that the inner temperature is well maintained and kept at the required level for successful printing. This as well prevents the electricity bill from fluctuating.

• Reduced dust particles

With the availability of dust particles in the air, they can accumulate on your Snapmaker 2.0 when you leave it in the open. These dust particles are very dangerous because they can clog the nozzle. Once the nozzle has been clogged with the dust particles, it will end up getting damaged since not all nozzles can be cleaned with ease. Moreover, the printing bed as well will accumulate dust when left in the open, which will make you produce poor-quality prints. There will be no dust accumulation when you use this enclosure, and you’ll end up getting high-quality prints.

• Quality prints

The Snapmaker 2.0 enclosure has a nozzle that you use to adjust the temperature and ensure that the required temperature is attained. The enclosure ensures that hot hair is trapped within the cabin and is kept constant. The availability of ventilation helps you regulate the temperatures. When the same temperature level is maintained, it helps in preventing warping. Moreover, the steady temperature within the cabinet ensures that the prints produced are of high quality.

• Noise reduction

Using Snapmaker 2.0 without putting it in an enclosure will produce noise due to the fact that most of them are very noisy, even to a point where the noise affects the people around you. It’s very uncomfortable when your printing affects the people surrounding you. By using Snapmaker 2.0 enclosure and at the same time printing in an enclosed area, you’ll be minimizing the noise that’s produced in the process of printing, ensuring that those around you are not affected in any way.

• Fewer fumes produced

During the printing process, there are some toxic gages that are produced when you heat certain filaments. This issue is common, especially when you are using ABS filaments. To ensure that these fumes don’t cause too much harm to the surrounding, it’s advised that you use the Snapmaker 2.0 enclosure and as well do the printing in an enclosed area. With the ventilation system, you get the option of releasing the gases to the desired area.

When heating certain filaments like the ABS, you realize that there is a strong odor that’s produced. Moreover, some harmful gases and dust particles are as well released into the air, which may cause harm to you. The air filter for 3D printer enclosure is something you should consider for the 3D printer as it will help in filtering the air and endure that you’re safe.